Home  /  News  /  Events
News

Thank you, Pune: three days at the CII Surface Coating Show 2026

Hall B, Stall C08, 19-21 November 2026, Auto Cluster Exhibition Centre, Chinchwad, Pune. More than 200 companies stopped by, and our engineers came home with a stack of duty points.

Published 22 November 2026 · Events

Share on LinkedIn

For three days, Stall C08 in Hall B was busy from the first hour to the last. More than 200 companies stopped by: paint shop and coating line builders, plating and pretreatment plants, oven and burner makers, filtration and application-equipment specialists, and plant engineers with a fan that needed a second look.

What visitors came to talk about

Our team logged 40+ duty conversations on the stand, and our engineers are already working through them. Every duty gets a worked selection, not a catalogue page.

Photos from the stand

A full stand at midday on the final day
A full stand at midday on the final day
The Jitamitra team at Hall B, Stall C08
The Jitamitra team at Hall B, Stall C08
Senior visitors at the discussion table
Senior visitors at the discussion table
A welcome at the stand
A welcome at the stand
Visitors at the stand in the evening
Visitors at the stand in the evening
Visitors with our team
Visitors with our team
A duty discussion at the table
A duty discussion at the table
Visitors with our team, evening
Visitors with our team, evening

What happens next

If you visited us, you will hear from us this week, with our company brochure, our capability statement and a short enquiry form. If we missed you, send us your duty point: we quote our standard range in 3 to 5 working days.

Thank you to every visitor, to CII for a well-run show, and to the whole Jitamitra team, who held the stand from opening to close.

See our range for surface coating and plating lines.

Published 22 November 2026. News and updates from the works at MIDC Ahilyanagar.

More from News

Also on the site

Service

From 1 September, every blower we dispatch carries its own commissioning card

JEE-SVC-008 — four pages, written for the engineer standing at the machine rather than for a purchase file. What is on each page, and what we would ask you to do with it. Read →

Field notes

Wrong rotation, bad foundation, rigid ducts

The three faults behind almost every commissioning call-out — plus the ten-point pre-start check and the numbers that decide whether to stop the fan. Read →

Archive

All news & updates

The ten most recent posts, short updates and any open roles — with everything older filed under its year and month. Open →

Ready to quote?

Send us the duty point. We'll quote in 3 to 5 working days.*

Flow, static, gas temperature, application — or attach a spec, GA drawing or a multi-fan schedule. Engineer to engineer.

Get a quote → Email the desk

ISO 9001:2015 quality system · every fan run-tested, every new model performance-tested to IS 4894 / ISO 5801 / AMCA 210 method · witnessed FAT on request.

*For our standard range. ATEX and special projects need 5 to 7 working days.